ASSEMBLY
SETTINGS
CLEANING MODES
NOTE:
For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use the Carpet setting.
NOTE:
Select Carpet for stuck-on dust and debris.
NOTE:
All accessories are compatible with both the wand and the handheld vacuum.
O
Press the power button to
begin vacuuming. To turn
off power, press button again.
I Bare Floor/Small Area Rugs
The brushrolls spin slowly
to clean bare floors and
small area rugs.
I
I Carpet
The brushrolls spin faster
to pick up debris below
the surface of your carpets.
POWER/SELECTOR SWITCH
To clean floors, place foot on floor
nozzle and tilt handheld vacuum back.
FLOOR MODE
Detach the nozzle for more reach to clean
baseboards, ceiling fans, window sills, and
other hard-to-access areas. To disconnect
the wand, stand the vacuum upright. Step
on the foot pedal on the side of the nozzle,
then pull the wand out of the nozzle.
ABOVE-FLOOR WITH WAND
To use in Hand Vac mode, press the
Wand Release
button and lift the handheld
vacuum off the wand. Great for cleaning stairs,
furniture, and countertops.
ABOVE-FLOOR HANDHELD
(Click)
1
2
3
1.
Insert
Wand
into
Floor Nozzle
.
2.
Insert
Handheld Vacuum
into wand.
3.
Snap the
Accessory Holder
onto the wand,
then place accessories in the holder.
Ensure all connections click securely into place.
(Click)
Wand
Release
4
5
AUS sharkclean .com . au NZ sharkclean .co. nz
AUS 02 8801 7666 NZ 0800 112 660
