Shark duo clean IZ202SM, Руководство пользователя

Страница: 12 / 20

sharkclean.my
FLOOR NOZZLE
MAINTENANCE
CLEANING SOFT ROLLER
1. Turn off the vacuum.
2. Using a coin, turn locks counterclockwise to open, then lift off cover to access the self-cleaning
brushroll.
3. Clear airway of blockages.
4.
Replace cover by sliding inserts into slots, then pressing down firmly on all sides before turning locks
clockwise to close, until they click securely into place.
FLOOR NOZZLE
If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or
objects caught in the self-cleaning brushroll or Soft Roller.
If any hair is wrapped around the brushroll, continue
cleaning using the Carpet setting on a bare floor surface,
a low-pile carpet, or a small area rug. If some fibers remain
wrapped around the brushroll after continued use, carefully
remove them.
1 To remove Soft Roller from nozzle, pull the Soft Roller out by
the tab.
2 Tap loose debris off the Soft Roller. Use a dry towel to wipe
the Soft Roller clean, and to remove any debris caught in the
teeth behind the Soft Roller.
3 Hand wash the Soft Roller as needed. Use only water, and let
air-dry completely for at least 24 hours.
4
Reinsert the Soft Roller.