3
ABOUT CN-4000
1)
The CN-4000 is designed for charging all types of 6V lead-acid and 12V lead-acid
batteries, including WET (Flooded), MF (Maintenance-Free), EFB (Enhanced Flooded
Battery), GEL, AGM (Absorbed Glass Mat) batteries. It is suitable for charging battery
capacities from 1.2 to 130 Amp-Hours and maintaining all battery sizes.
2)
Built-in intelligent microprocessor makes charging faster, easier and safer.
3)
This charger has safety features, including spark proof, protection for reverse polarity,
short circuit, overheat and overcharge.
4)
It has auto-memory, which returns to last selected mode when restarted (except Repair
Modes).
5)
When the battery level indicator bars are flashing, it is on charging; when 5 bars are solid,
the charging is completed. But do NOT break the connection immediately. It will
automatically switches from full charge to maintenance status without overcharging or
damaging the battery.
6)
It is important to keep in mind the distance to the battery. The DC cable length from the
charger is approximately 75 inches (1900mm).
7)
Following is the charger’s technical specification:
AC Input
220-240VAC, 50- 60Hz, 0.8A;
DC Output
12VDC, 4A;
6VDC, 4A;
Temperature Controlled
Power (IN)
Variable Power, 60W Max
Efficiency
85% Approx
Back Current Drain
<5mA
Ambient Temperature
0
℃
~ +40
℃
Charger Type
8 steps, Full-automatic Charging Cycle
Battery Type
All Types of 6V and 12V Lead-acid
Batteries
Battery Capacity
1.2-130Ah (12V), 1.2-130Ah (6V),
Maintains All Battery Sizes
Housing Protection
IP54
Accessories Included
Cable Clamps
Other Features
Norm / Cold Mode, and 8-hour Repair
Process if battery voltage is too low (only
for 12V Mode)