manualshive.com logo in svg

Shark BR-343087E, Инструкция по эксплуатации и каталог запасных частей, Страница: 27 / 28

Поделиться
Скачать
Shark BR-343087E Скачать руководство пользователя страница 27

BR PRESSURE WASH ER 

WARRANTY

SHARK BR  •  97-723  •  REV. 8/05a

 PRESSURE 

W

ASHER  

W

ARRANTY

SHARK LIMITED NEW PRODUCT WARRANTY

PRESSURE WASHERS

WHAT  THIS  WARRANTY  COVERS

All SHARK PRESSURE WASHERS are warranted by SHARK to the original purchaser to be free from defects in materials 
and workmanship under normal use, for the periods specifi ed below. This Limited Warranty is subject to the exclusions shown 
below, is calculated from the date of the original purchase, and applies to the original components only. Any parts replaced 
under this warranty will assume the remainder of the part’s warranty period. This warranty applies to the original purchaser and 
is not transferable.

LIMITED  LIFETIME  PARTS  WARRANTY:

Components manufactured by SHARK, such as frames, handles, and belt guards.  Forged brass pump manifold. All heating 
coils will have a three year warranty. Internal components (excluding oil seals) on the oil-end of all pressure washer pumps will 
have a seven year warranty.

ONE  YEAR  PARTS  WARRANTY:

All other components, excluding normal wear items as described below, will be warranted for one year on parts.  Warranty on 
these parts will be for one year regardless of the duration of the original component manufacturer’s part warranty.

WARRANTY  PROVIDED  BY  OTHER  MANUFACTURERS:

Motors, generators, and engines, which are warranted by their respective manufacturers, are serviced through these 
manufacturers’ local authorized service centers. SHARK cannot provide warranty on these items.

WHAT  THIS  WARRANTY  DOES  NOT  COVER

This warranty does not cover the following items:

1.  Normal wear items, such as nozzles, guns, discharge hoses, wands, quick couplers, seals, fi lters, gaskets, O-rings, 

packings, pistons, pump valve assemblies, strainers, belts, brushes, rupture disks, fuses, pump protectors.

2.  Damage or malfunctions resulting from accidents, abuse, modifi cations, alterations, incorrect installation, improper 

servicing, failure to follow manufacturer’s maintenance instructions, or use of the equipment beyond its stated usage 
specifi cations as contained in the operator’s manual.

3. 

Damage due to freezing, chemical deterioration, scale buildup, rust, corrosion, or thermal expansion.

4. 

Damage to components from fl uctuations in electrical or water supply.

5. 

Normal maintenance service, including adjustments, fuel system cleaning, and clearing of obstructions.

6. 

Transportation to service center, shop labor charges, fi eld labor charges, or freight damage.

WHAT  YOU  MUST  DO  TO  OBTAIN  WARRANTY  SERVICE

While not required for warranty service, we request that you register your SHARK pressure washer by returning the completed 
registration card. In order to obtain warranty service on items, you must return the product to an Authorized SHARK Dealer, 
freight prepaid, with proof of purchase, within the applicable warranty period. If the product is permanently installed, you must 
notify your Authorized SHARK Dealer of the defect. The Authorized Dealer will fi le a claim, which must subsequently verify the 
defect. In most cases, the part must be returned to SHARK freight prepaid with the claim. For warranty service on components 
warranted by other manufacturers, the Authorized Dealer can help you obtain warranty service through these manufacturers’ 
local authorized service centers. 

LIMITATION  OF  LIABILITY

SHARK’S liability for special, incidental, or consequential damages is expressly disclaimed. In no event shall SHARK’S 
liability exceed the purchase price of the product in question. SHARK makes every effort to ensure that all illustrations and 
specifi cations are correct, however, these do not imply a warranty that the product is merchantable or fi t for a particular purpose, 
or that the product will actually conform to the illustrations and specifi cations. THE WARRANTY CONTAINED HEREIN IS 
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF FITNESS 
FOR A PARTICULAR PURPOSE. SHARK does not authorize any other party, including authorized Dealers, to make any 
representation or  promise on behalf of SHARK, or to modify the terms, conditions, or limitations in any way. It is the buyer’s 
responsibility to ensure that the installation and use of SHARK products conforms to local codes. While SHARK attempts 
to assure that its products meet national codes, it cannot be responsible for how the customer chooses to use or install the 
product.

SHARK PRESSURE WASHERS

   1-800-771-1881    www.shark-pw.com

Содержание BR-343087E





























Отзывы:

Нет отзывов