Shark BR-304031, Инструкция по эксплуатации и каталог запасных частей

Страница: 11 / 22

BR PRESSURE WASHER
OPERATOR’S MANUAL
11
TROUBLESHOOTING GUIDE
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
Gas engine will not run. Out of gas. Replenish supply. Use only recom-
mended fuels. Refer to
Before Starting
under Operation .
Fuel valve closed (if so equipped). Open valve.
Loose spark plug wire. Reconnect.
Choke or throttle set incorrectly. Refer to To Start under Operation .
Engine ON/OFF switch in OFF
position.
Place engine ON/OFF switch in ON
position.
Low engine oil level. Replenish supply. Engine will not start or
run if oil is low (on engines equipped with
low oil protection).
Refer to provided gasoline engine manual for additional troubleshooting.
Pressure washer runs
but won't spray. Trigger of trigger gun released. Squeeze trigger.
Water supply not turned on. Open water supply valve.
Clogged pressure nozzle. Clean pressure nozzle opening.
Low spray pressure at
pressure nozzle. Inadequate water supply. Fully open faucet. Check for kinked or
damaged hose. Use 5/8 inch minimum
hose. Check for debris clogging inlet
screen.
Partially clogged or damaged
pressure nozzle.
Clean or replace.
Engine throttle not in full throttle
position.
Place engine throttle in full throttle
position.
Uneven spray pattern. Partially clogged or damaged
pressure nozzle.
Clean or replace.