16
s h a r kc l e a n . e u
ENGLISH
15
+44 (0)800 862 0453
MAINTENANCE
To keep your vacuum’s
suction power optimal,
follow these instructions.
Make sure unit is off and
cord is unplugged.
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
Clean every 3 months.
Post-Motor Filter
(HEPA)
Clean once
a year.
Pre-HEPA filter
Clean once a year.
1
Press down on Dust Cup
Release button and lift
dust cup off pod.
2
Hold dust cup over a bin
and press the latch on the
bottom of the dust cup to
empty it.
EMPTYING THE DUST CUP
STEP 1
STEP 2
WARNING: To reduce
the risk of shock and
unintended operation,
turn off power and
unplug unit before
servicing�
Hand wash only with
water to prevent
damage from cleaning
chemicals� Allow
ALL filters to air-dry
completely before
replacing them
in the vacuum to
prevent liquid from
being drawn into
electric parts�
IMPORTANT:
Do not use
soap when cleaning any of
the filters.
3
Press top dust-cup empty
latch to access dust
screen and remove built-
up debris as required.
STEP 3
CLEANING THE FILTERS
STEP 1
STEP 2
1
Pre-Motor
(foam and felt):
With the dust cup
removed, take out the
foam and felt filters, and
rinse with water. Tap loose
dirt off filters between
washes as needed.
2
Post-Motor (HEPA):
To access the HEPA and
foam filter, reach under
the grill, pull the latch
forward, and pull the grill
away from the vacuum.
3
Remove the filter assembly,
then remove the pre-HEPA
filter from the assembly.
Rinse both HEPA filter and
pre-HEPA filter and allow
to air dry completely before
replacing. Hand wash only.
HEPA
HEPA
FELT FILTER
FOAM FILTER
FILTER FRAME
Filter Access
PRE-
HEPA
PRE-MOTOR
POST-MOTOR
POST-MOTOR
STEP 3
