VERSATILE FLOOR-TO-CEILING CLEANING
DUOCLEAN® TECHNOLOGY
A
Handle
B
Hose
C
Vacuum Pod
D
Wand
E
Motorized Floor Nozzle
F
Upholstery Tool
G
Pet Power Brush
H
12" Crevice Tool
A
B
C
D
E
ASSEMBLY
2
(Click)
1
(Click)
4
(Click)
3
(Click)
WHAT’S INSIDE:
UPRIGHT MODE
POWERED LIFT-AWAY® MODE
Place your foot gently on the floor
nozzle and tilt the handle back. Choose
floor type and press power button.
1. Insert wand into floor nozzle.
2. Insert handle into wand.
3. Place pod onto wand.
Slide down to connect.
4. Connect hose to back of pod,
pressing until it clicks into place.
Lift-Away
Release
Press Lift-Away Release
button to lift pod off wand to
clean hard-to-reach places.
Floor Type
Power Button
Hard Floor:
Gentle on bare floors
and delicate area rugs.
Thick Carpet/Area Rug:
Optimized
brushroll speed and suction for thick
carpets.
Carpet/Low Pile:
Optimized brushroll
speed and suction for carpets.
F
G
H
Hard Floor
Gentle on bare floors and
delicate area rugs.
The brushroll and
the Soft Roller
both spin together
slowly to help with
debris pickup.
ON FLOORS
Direct engagement with the Soft
Roller removes large particles,
small particles, and stuck-on dust.
ON CARPETS
*
The Soft Roller pulls in large particles, while the
deep-cleaning bristle brush removes embedded
fine dirt.
* For deep cleaning per ASTM F 608 (embedded dirt in carpet) please use in Carpet/Low Pile mode.
©2018 Sharkninja Operating LLC
Thick Carpet/Area Rug
Suction for thick carpets and
area rugs.
Carpet/Low Pile
Optimized brushroll speed
and suction for carpets.
Both brushrolls
spin faster to
help pick up
debris below
the surface.
H
A
V
IN
G
T
R
O
UBL
E?
ISSUE
Vacuum is not picking
up debris. No suction
or light suction.
Solution
Empty dust cup, clean
filters, check all openings
for blockages.
ISSUE
Vacuum lifts area rugs.
Solution
Turn off the unit to disengage
the brushrolls and restart
with the Power button.
ISSUE
Brushroll and/or Soft
Roller does not spin. The
Brushroll Indicator Light
on the floor nozzle turns
red.
Solution
Turn off the unit and
move away from any
obstruction, then turn
on power and tilt handle
back. If the light remains
red, turn off and unplug
the vacuum. Disconnect
the nozzle and remove
any blockages. Make sure
the brushroll lid is firmly
locked into position on
both sides. Plug in the
vacuum, turn on power,
and tilt handle back.
If Brushroll Indicator Light
isn’t green and headlights
are flashing, check again
that both sides of the lid
are locked into place.
If the light is still red,
please visit
sharkclean.com/support
for additional information.
