sharkclean .com
sharkclean .com
SETTING UP YOUR REPLACEMENT ROBOT
SETTING UP YOUR REPLACEMENT ROBOT
DUST BIN
On your original robot, press the dust bin release
button on the back of the robot and slide out the dust
bin. Slide the dust bin into the replacement unit.
SIDE BRUSHES
BRUSHROLL
Remove the 2 side brushes from your original unit
by pulling them off the pegs on the bottom of the
robot. Install them on the replacement robot by
pressing them down over the pegs until they click
into place.
To remove the brushroll from your original robot,
push up the tabs on the brushroll access door, then
lift off the door.
Lift out the brushroll.
Install the brushroll in the replacement robot, inserting
the flat end first. Close the brushroll access door and
press down until it clicks into place.
Before using your new replacement Shark IQ Robot® vacuum, you will need to transfer a few parts from
your original unit to your new robot:
the
2 side brushes, the dust bin, the brushroll, and the battery
.
