
Page 4
Shark 925A/925SS
Figure 2 - Pressure Hose Installation
ASSEMBLY
Unpacking
Unpack carefully. Wear safety glasses or goggles while
unpacking, assembling, or operating pressure washer. If
there are missing components or hidden damage,
immediately contact carrier concerning discrepancies.
1. Cut strapping band from pressure washer and pallet.
2. Remove pressure washer from pallet.
Parts Included
•
Pressure Washer
•
Pressure Hose
•
Trigger Gun
•
Dual Lance Wand
•
Pressure Nozzle (3 ea.)
•
Battery Terminal (2 ea.)
•
Operating Instructions/Parts Manual
•
Gasoline Engine Manual
Tools Required
•
1/2" Open End Wrench
•
Flat Blade Screwdriver
Pressure Hose, Trigger Gun and Wand
1. Install the pressure hose on the pressure washer as
shown in
Figure 2.
Figure 3 - Trigger Gun/Dual Lance Wand
2. Assemble wand components as shown in
Figure 3.
3. Make sure all plumbing connections are tight.
Battery
WARNING: Wear eye, hand and skin protection when
handling or connecting battery.
WARNING: Batteries generate explosive gases dur-
ing normal battery operation. Do not expose the bat-
tery to flame or sparks as these gases may ignite.
WARNING: Battery fluid is highly acidic. If battery fluid
contacts skin or clothing, wash immediately with soap
and water. If battery fluid enters eye, immediately flood
eye with running cold water for at least 15 minutes
and get immediate medical attention.
1. Place battery in battery box (battery not included).
Use a standard 12 volt automotive battery. Select a
battery similar to the one in
Figure 4
for proper fit
and installation.
Figure 4 - Battery Dimensions
+
-
RELIEF VALVE
PRESSURE HOSE
DUAL LANCE WAND
TRIGGER GUN
10-1/2”
MAX
6-3/4”
MAX
8-3/4”
MAX