Shark 2400WD Series, Инструкция по эксплуатации

Страница: 5 / 12

sharkclean .com
If the robot has no charge or it cannot return to the
dock, manually place it on the dock. The indicator
light will turn blue and the robot will beep when it
is correctly placed on the dock.
When the cleaning cycle is complete, or if the battery
is running low, the robot will search for the dock.
If the robot doesn't return to dock, its charge may
have run out, or if it is in wet cleaning mode, the
dock may be blocked by carpet.
CHARGING
IMPORTANT: The SHARK® IQ 2-IN-1 ROBOT has a pre-installed rechargeable battery. Charge the battery
completely before first use. It may take up to 6 hours to fully charge.
To turn ON the robot, press and hold the DOCK
button for 5-7 seconds. To charge , place the robot on
the dock. The robot will beep when charging begins
and the charging indicator on the dock will turn from
green to blue.
NOTE:
When manually placing the robot on the dock, make sure the
Charging Contacts
on the bottom of the robot are
touching the ones on the dock. While the robot is charging, both white LED lights will flash. When charging is complete,
both white lights will illuminate steadily.
NOTE: When picking up the robot, be careful not to place fingers between the bumper and the base of the robot.