Press the handvac release button and disconnect
the handheld vacuum from the wand.
To remove the dust cup from the handheld vacuum,
press the
Dust Cup Release
button near the handheld
vacuum nozzle. Tilt the dust cup and lift off to remove.
To empty dust and debris, hold the dust cup over the
trash, then slide the
Lid Release
slider forward.
To empty the
Dust Cup
while it is attached to the
handheld vacuum, position the dust cup over a trash
receptacle and slide the
Lid Release
slider forward.
Remove debris from the dust screen by tapping it
gently or wiping it with a dry cloth as needed. To
clean the interior of the dust cup, rinse it with water.
Place it on its side to air-dry for at least 24 hours
before reinstalling.
EMPTYING THE DUST CUP
REMOVING AND CLEANING THE DUST CUP
MAINTAINING YOUR VACUUM
1
1
2
2
Press the dust cup release button and remove the
dust cup. Pull the foam and felt filters out of the
back of the dust cup.
Remove the dust cup. Pull the post-motor filter out
of the handheld vacuum.
MAINTAINING YOUR VACUUM
PRE-MOTOR FILTER
POST-MOTOR FILTER
CLEANING THE FILTERS
To clean filters, rinse them with water only. Allow all filters to air-dry completely for at least 24 hours
before reinstalling to prevent liquid from being drawn into electric parts. Clean the pre-motor filters at
least once a month and post-motor filter at least once a year. Tap off loose dirt between washes when
needed. More frequent cleaning may sometimes be necessary with heavy use.
IMPORTANT: DO NOT
use soap when cleaning the filters. Use water only.
NOTE:
To order filters and other parts, visit
sharkclean.eu
Pre-Motor Foam and
Felt Filter Kit
Post-Motor Filter
Post-Motor
Filter
ENGLISH
48
49
0800 862 0453
sharkclean .eu