Shark HNG • 9.801-195.0 • Rev. 4/14
15
PRESSURE
W
ASHER
OPERA
TOR’S MANU
AL
98011950-24
98011950-37
SHUTTING DOWN AND CLEAN-UP
STORAGE
CAUTION: Always store your pressure
washer in a location where the temperature
will not fall below 32°F (0°C). The pump in
this machine is susceptible to permanent damage
if frozen. FREEZE DAMAGE IS NOT COVERED BY
WARRANTY.
1. Stop the pressure washer, squeeze spray gun
trigger to release pressure.
2. D e t a c h w a t e r s u p p l y h o s e a n d h i g h
pressure hose.
98011950-22
STEP 1:
Remove detergent suction
tube from container and insert into
one gallon of fresh clean water. Pull
trigger on spray gun and siphon
water for one minute.
STEP 2:
Turn/push burner switch to
“OFF” position. Open spray gun al-
lowing water to cool. Then turn/push
pump switch to “OFF” position.
STEP 3:
Turn off water supply.
STEP 5:
Engage the spray gun
safety lock.
STEP 4:
Press trigger to release
water pressure.
Safety
Latch
3. Turn on the machine for a few seconds, until
remaining water exits. Turn off immediately.
4. Do not allow high pressure hose to become
kinked.
5. Store the machine and accessories in a room which
does not reach freezing temperatures.
CAUTION: Failure to follow the above directions will
result in damage to your pressure washer.
Burner
Switch
Pump
Switch
98011950-23
98011950-21
