Shark Pressure Washers HE-2010, Инструкция по эксплуатации и каталог запасных частей

Страница: 8 / 18

8
HE SERIES PRESSURE WASHER
OPERATOR’S MANUAL
SHARK HE • Rev 7/02
GENERAL WASHING
TECHNIQUES
Hold spray nozzle approximately one foot from the sur-
face being cleaned. Spray at an angle to get under the
material and lift it off.
When washing large objects, use detergent injector to
apply detergent (see section “How to Use the Detergent
Injector”). Start washing from the bottom and work up.
Better detergent economy and faster results will be ob-
tained by allowing the detergent to set 5-10 minutes. Af-
ter washing, rinse from the top down.
Cleaning heavy dirt or material away with a hard stream
of clear water is recommended before using a cleaning
agent.
SHUTDOWN PROCEDURES
1. Rinse all lines (and injector) with clean water, to re-
move any soap residue.
2. Turn power switch to OFF position.
3. Turn off water supply.
4. Open spray gun to relieve remaining pressure.
5. Remove water supply hose.
6. In freezing conditions, disconnect water supply and
open spray gun to allow water to drain, then turn off
motor.
CAUTION: Do not allow pump to run longer than
5 minutes without water. Disconnect all hoses to
allow water to drain.
CAUTION: With machine off, open spray gun to
release pressure before removing discharge hose.
Quick
Coupler
1 Foot
Wand
Spray Nozzle