Shaper S01-EN, Руководство по эксплуатации продукта

Страница: 31 / 84

shapertools.com 23
Compliance
Noise and Vibration Information
The typical values determined in accordance with
EN 60745 are:
Sound-pressure level 77dB
Sound-power level 88dB
Measuring uncertainty allowance K = 3dB
Overall vibration levels (vector sum for three
directions) are measured in accordance with EN
60745:
Vibration emission level (3-axis) a
h
< 2,5m/s
2
Uncertainty K = 1,5m/s
2
The specified emissions values (vibration, noise):
•
Are used to compare machines.
•
Are used for making preliminary estimates
regarding vibration and noise loads during
operation.
•
Represent the primary applications of the
power tool.
An increase of these values is possible for other
applications, with different cutting bits, or if the
tool is not maintained. Take note of idling and
downtimes.
Equivalent Isotropic Radiated Power
The maximum RF output power is declared as
follows, in accordance with EN 300 328:
Maximum Conducted Power 16.4dBm
Maximum Antenna Gain 2dBi
Equivalent Isotropic Radiated Power 18.4dBm