Back to the main screen, you can see the mask you set in channel 1(main stream).
3. Network Setting
There are five sub options for
“
Network
”
Setting: Network Setting, DDNS Setting, NTP Setting,
Email Setting, and Management Platform.
In the
“
Network Setting
”
, you can set NVR
’
s IP address, subnet mask, gateway and so on. Then
use PC terminal to run
“
ping
”
command to check NVR
’
s IP has connected with LAN.
Note:
IP address might conflict with each other, please set the gateway correctly, or NVR might fail to
work. Please ensure all the IP addresses in LAN are unique.
Setting Remote Port:
The default port is 5050, if there are more than one NVR in the LAN, you
need to change this port for login NVR by IE, CMS. Login NVR by mobile, the port should be +3
