21
7. Alarm
Modify the settings of alarm trigger and actions including Alarm Setting and Motion Detection.
Alarm Setting
Enable Alarm
Check to Enable Alarm
Alarm Duration
10, 30 seconds; 1, 5, 10 minutes; Non-Stop
Alarm Trigger
Motion [NONE SUPPORT
Single MJPEG]
Check to enable Motion
Ethernet Lost
Check to enable Ethernet Lost
DI1 MODE
On, Off
DI1 Level
Low, High
Alarm Action
Upload via FTP
Check to enable this action and select file format
Upload via SMTP
Check to enable this action and select file format
Local Storage Save
Check to enable this action and select file format
DO1 MODE
On, Off
DO1 Level
Low, High
Alarm Preset
Check to enable this action with Pelco D protocol
