Nightstand
-
P
age
|
3
S
Hanty-
2-C
hic.com
1.
Begin by cutting the nightstand sides, top, bottom and shelf according to the cutting diagram.
We can’t stress enough that the width of boards this size can have a shockingly wide variety of actual widths. We have made these
diagrams to accommodate the average width you should expect which should be about 11-1/4”. It can vary by as much as an 1/2” so
make sure to measure your boards and make any necessary adjustments. This will be especially important when we cut and assemble
the drawer. PLEASE wait to cut the drawer boards until you have made the nightstand. You will then cut the drawer boards to fi t.
After you have cut the nightstand boards attach by drilling for 1-1/4” pocket screws and then attach with screws and wood glue.
2.
Next attach the shelf by drilling for 1-1/4” pocket screws and attaching with screws and wood glue. We spaced the shelf 1/8” more
than the width of the 1x12 boards that will make up the drawer height. Again, space this according to the width of your boards.
1
2
A
A
B
B
C
