media Console Table
-
P
age
|
6
s
Hanty-
2-C
hic.com
5
6
4.
Attach face frame with wood glue and 1-¼" brad nails, making
sure the outside edges and the shelf edges are flush.
Fill any nail holes with wood filler. Allow to dry and sand
smooth.
Prime and paint your console table. Allow to dry.
5.
Cut the ¼" plywood back to fit flush with the outside edges of
the console table and flush with the top edge of the top shelves
and the bottom edge of the bottom shelves. Sand and paint.
Allow to dry.
Attach to the back of your console table with ¾" staples.
6.
Now for the four doors. Measure the openings in the lower half
of the console table. You want a 1/8" gap all around the doors.
The above measurements should be close but make sure to cut
your ½" MDF to fit properly.
Cut your decorative door stiles and rails to length and attach
with wood glue and ½" brad nails as shown. Repeat for a total
of four doors.
Fill any nail holes with wood filler. Allow to dry and sand
smooth.
Prime and paint the doors. Allow to dry.
4
25 ¾"
25 ¾"
23 ¼"
½"
¼"
15
3
/
8
"
10
3
/
8
"
X 4
