DIY D
InIng
T
able
b
ench
- P
age
|
2
S
hanty
-2-C
hiC
.
Com
Drill pocket holes as indicated by the arrows. All pocket holes
in the 1 x 6 material are for 1-1/4” screws. The remainder of
the pocket holes should be for 2-1/2” screws
Страница 1: ...n 1 x 6 x 8 2 Pine or whitewood board 2 x 4 x 8 3 Pine or whitewood board 2 x 3 x 4 1 Pine or whitewood board 4 x 4 x 8 1 1 x 4 x 4 1 Optional you can also use the 1 x 6 cutoffs for this Brad nails ha...
Страница 2: ...ing Table Bench Page 2 Shanty 2 Chic com Drill pocket holes as indicated by the arrows All pocket holes in the 1 x 6 material are for 1 1 4 screws The remainder of the pocket holes should be for 2 1 2...
Страница 3: ...t I promise it s super easy Start by screwing the 4 x 4 pieces together with 2 1 2 pocket hole screws Then add your smaller corner brackets with glue and 3 wood screws pre drill to prevent splitting A...
Страница 4: ...to both the 4 x 4 as well as each 2 x 4 angled brace Do the same thing with the center leg This time two 2 x 3 braces will be used though One on each side Remember to use lots of wood glue at every jo...
