Figure 4
Powered from
12V AC/DC
Power Adaptor
Power Supply
Amplified Signal
TV ANT. in
TV 1
TV 2
12V DC
DC 12V or 24V
+ -
Powered from
DC Battery
Installation Recommendations
Minimum bend radius: 3in for RG-59 coax.
Tighter bends will cause shorts and change imped-
ance.
Pulling Tension: 75lbs maximum. Leave no
tension on cable after it is installed.
Staples or clamps: The use of flat staples with
coax cable is damaging to the cable. Only round
headed staples should be used. Any clamps or
securing devices used with coax should grip the
cable evenly around the circumference without
crushing the cable.
Exposure to high heat: Maximum temperature
limit is 80°C (176°F). Keep cable away from heating
vents, engine compartments and engine exhaust
pipes.
Crushing: Coax should not be installed in a
manner that would allow it to be crushed. It should
not be “stuffed” or wedged into areas where the
cable could be pinched by the flexing of the boat hull
or cabin.
