background image

9

Press the battery capacity indicator (BCI) button. The lights will illuminate according to the

batteries capacity level. See chart below:

BATTERY CAPACITY 
INDICATOR (BCI) BUTTON

LIGHT 

BATTERY

 Lights                                                 Capacity
 4 Green Lights                 The battery is at full capacity
 3 Green Lights                 The battery is at 75% capacity
 2 Green Lights                 The battery is at 50% capacity 

 1 Green Light 
                         
 Lights go out                 

The battery is at 25%  capacity and re-

quires charging soon
The battery is less than

  

10%  capacity 

and requires charging immediately

1.  Do not disassemble the battery.
2.  Keep away from children.
3.  Do not expose the battery to water or salt water, battery should be stored in a cool and dry location and 

should place the battery in cool and dry environment.

4.  Do not place the battery in high-temperature locations, such as near a fire, heater, etc.
5.  Do not reverse the positive terminal and the negative terminal of the battery.
6.  Do not connect the positive terminal and the negative terminal of the battery to each other with any metal 

objects.

7.  Do not knock, strike or step on the battery.
8.  Do not solder directly onto the battery and pierce the battery with nails or other edge tools.
9.  In the event that the battery leaks and the fluid gets into one’s eye, do not rub the eye. Rinse well with 

water. Immediately discontinue use of the battery, if, while using the battery emits an unusual smell, feels 

hot, changes color, changes shape, or appears abnormal in any other way.

BATTERY PACK

• 

Store the battery pack fully charged.

• 

Once the charging light turns green, remove the battery from the charger.

• 

Do not store the battery pack on the tool.

• 

After charging, the battery pack may be stored in the charger, as long as the charger is not plugged in.

CHARGER MAINTENANCE

• 

Keep the charger clean and clear of debris. Do not allow foreign material to get into the recessed cavity 

or onto the contacts. Wipe the charger clean with a dry cloth. Do not use solvents or water, and do not 

place the charger in wet conditions.

• 

Unplug the charger when there is no battery pack in it.

• 

Fully charge the batteries before placing them in storage.

• 

Store the charger at normal room temperature. Do not store it in excessive heat. Do not use the charger 

in direct sunlight. Recharge at room temperature between 45˚F and 104˚F (7˚C and 40˚C). If the battery 

pack is hot, allow it to cool down before recharging.

BATTERY CHARGER

INDICATORS

CAPACITY

Содержание 9000100
















Отзывы: