8
www.shadowspec.com
STAGE 3
INSTALLATION OF YOUR UMBRELLA MOUNT
W
e offer four different mounting options. Please go to the section of your purchased mounting option. We recommend
that you read through all of the instructions before starting. It’s worth it, trust us.
Step 1
First, unscrew the Security Lock Screw under the Rotating Lock Lever - See
Figure 5.
Step 2
Remove Spigot from your umbrella Mast.
Step 3
Affix the Spigot to your mounting option of choice
(Options 1 - 4).
Note:
Your additional Frame will be affixed to the Unity Mast in a different Mast Channel based on your selected
Frame shape. Square Frames will be affixed in the channels beside each other. Octagonal Frames will be
affixed opposite each other. See
Figure 4.
OPTION 1 -
FREESTANDING BASE
For installation you will require:
•
An adjustable spanner (there is a No. 17 Ring Spanner included with umbrella box)
•
Hex Key Set - Included in your umbrella box
•
The complete Freestanding Base kit. See
Figure 6
of included components
•
12x Concrete Pavers - Not included. Size required: 400mm x 400mm x 40mm / 1’3” x 1’3” x 1.5” which can be
purchased from your closest building supply store eg Home Depot / Bunnings.
•
Optional: Heavy Duty Wheels / Castors
Step 1
Turn the Freestanding Base upside down.
Step 2
a. Screw the supplied Threaded Feet into each corner of the underside of the Base.
b. If you’ve purchased the Optional Wheels / Castors, screw them into the corners instead. See
Figure 6.5.
Step 3
Return the Freestanding Base to its correct orientation, supported on its Threaded Feet / Optional Castor.
Step 4
Affix the Spigot to the Freestanding Base using the provided Unity Screws and Nuts. It’s important to use
the holes between the pavers to ensure there’s enough clearance when you insert the pavers in Step 6
Step 5
Adjust the feet or wheels to ensure the base is level, the Spigot has a spirit level built-in to assist.
Step 6
Place the Freestanding Base in the desired location.
Step 7
Insert the 12 pavers for ballast then slide the base cover over top.
Step 8
Slide your Rotation Plate over the Spigot and move on to
Stage 4.
Figure 4
- Square and Octagonal Frame Orientation
Square Umbrella
Octagon Umbrella
Umbrella Mount
Umbrella Mount
Security Lock
Screw
Rotation Lock Lever
Unity Spigot
Unity
Mast
Figure 5
- Location of Security Locking Screw
1.
2.
Security Lock
Screw
Carriage