13
Figure 10
- Securing Surface Plate to Wooden Deck (suggestion only)
Serenity Spigot
Surface Plate
NOTE: Washer between
Surface Plate and decking
Spigot and Surface
Plate
12mm / 1/2” CSK bolts
running right through and
fastened with a washer and
locknut
Additional 100mm x 100mm / 4” x 4”
timber joist inserted between deck
bearers to provide a substantial anchor
point for bolts to fasten through
Standard 20mm / 0.8”
timber decking
200mm x 50mm / 8” x 2”
timber deck joists
Figure 11
- Securing Surface Plate to Concrete Slab (suggestion only)
Serenity Spigot
Surface Plate Mount
CONCRETE SLAB
Edge of slab
Minimum 150mm / 6”
Spigot and Surface
Plate Mount
Recommended minimum depth of reinforced concrete slab 100mm / 4”.
NOTE: No screws or fixings to be within 150mm / 6” of closest edge of concrete slab.
Use a Dyna-Bolt or Concrete
Screw at least 100mm / 4” long
to suit the four 12mm / 1/2”
holes in the Surface Plate.
