ShadeTree 20'x40' Heavy-Duty, Fire-Resistant Event Tent w/Sidewalls, Руководство пользователя

Страница: 8 / 12

To assemble the support bars, you will need to start by collecting the following parts:
Parts Quantity
Short Bolts with Nuts 28
57.5 ” reinforcement bar 14
3 0” reinforcement bar 7
6)
Attach a 57.5 ” reinforcement bar to each A2 connector . Then connect the rest of the 57.5 ” reinforcement
bars to each B2 connector using a nut and bolt. (You will not want to tighten the nuts and bolts until all are
installed)
7)
Attach one end of each 30 ” reinforcement bar to each A1 and B1 connector using a nut and bolt.
8)
Bringing the ends of the three bars together, connect using a nut and bolt.
9)
Once everything is connected, tighten all nuts and bolts.