6
5
(Astral-TC Internal Stem shown)
Option B: If you wish not to use optional internal stem cover, proceed below.
Using a two person team, lift umbrella with attached internal stem and install umbrella
onto mount kit, SM PLATE on your steel base weight. Tighten 5 bolts to secure
umbrella in place with allen wrench.
Note:
Do not use power drill. May cause damage
to umbrella. Once complete, proceed below.
Slide internal stem cover over bottom of Polaris mast. Using a two person team, lift
umbrella with cover and insert bottom of mast onto internal stem. Tighten 5 bolts to
secure umbrella in place. Slide internal stem cover down to cover internal stem.
Internal Mast Stem Cover Installed
(Astral-TC Internal Stem shown)
Attaching Polaris to Internal Stem
Lift rotating handle from mast. Rotate Polaris mast until the bore holes for the locking
screws in the internal stem line up in the mast. Tighten locking screws with allen wrench
into the mast and internal stem to secure.
Note:
Do not use power drill. May cause
damage to umbrella. Once complete, proceed to “Leveling Umbrella” on page 6.
Bore Holes
You are now ready to operate your umbrella!
Leveling Umbrella
Check the vertical position of the umbrella with a level tool.
If the umbrella is not level, lift optional internal stem cover to access internal stem.
Untighten the 5 bolts with 1-2 rotations (do not completely untighten bolts!). The internal
stem can rotate without applying force. Correct the vertical level position with leveling
screws.
Once leveled, re-tighten the 5 bolts with allen wrench on internal stem.
Note:
Do not
use power drill. May cause damage to umbrella. Slide optional internal stem cover
down and cover internal stem.
Содержание POLARIS-30S
Страница 1: ......
