5
10
TO PROPERLY FOLD CANOPY
The 100% solution dyed canopy will last longer if you fold it as it was packed
and shipped. This technique is similar to the way a parachute is folded and is
especially important when folding the canopy for seasonal storage or when left
in the closed position for an extended period of time.
Using this technique at all times will significantly extend the
life of the canopy.
1. When the canopy has been fully lowered, stand in front
of the canopy structure and begin the folding process by
pulling out two panels opposite the mast.
Pull the two panels together and roll tight into the
canopy.
2. Once rolled tight, pull adjacent panels out one at a time
and fold to the center, alternating sides until all the
panels have been pulled out from the arms and folded
into the center.
3. Wrap provided strap around canopy to secure.
PROTECTIVE COVER
1. Screw rods together and insert into slit of the cover.
2. Unzip cover.
3. Using the rod as a guide, slide cover over your umbrella.
4. Attach rod with key ring to the zipper.
5. Pull on string to zip down your cover and tie to secure.
OPTION B:
If you wish not to use optional internal stem cover, proceed
below.
1. With your umbrella laying on a clean soft surface, remove internal stem from
bottom of mast by removing the (3) turning handle bolts underneath the
turning handle.
NOTE:
Do not remove the bolt above the turning handle!
2. Install internal stem onto mount kit or free-standing base with supplied 4
stem bolts. Tighten with provided 5mm hexagon wrench to secure.
NOTE:
Do not use power drill. May cause damage to umbrella.
3. Remove internal stem cover from bottom of umbrella mast.
4. Using a two person team, lift umbrella and insert bottom of mast onto
internal stem.
3 turning
handle
bolts
Do not
remove!
