ShadeLab Kumo, Инструкция по сборке, Страница: 14 / 24

14
| | ASSEMBLY
Fix the levers that form the side supports
onto the sides of the bottom cassette (see
ref. 11 fig. 12), ensuring that the correspond-
ing holes are aligned.
Preassemble the plate (see ref. 12 fig. 13) in
the terminal bar connecting kit (see ref. 13
fig. 13), (Allen wrench 5). The screws must
not be fully tightened.
ATTENTION
The arm is provided with a safety band that
blocks the tightening mechanism. Do not
remove this band until the awning has been
completely assembled. Failure to respect the
correct assembly procedure may cause seri-
ous harm to persons, animals and things in
the vicinity.
ATTENTION
NEVER reuse the arm lock after removing it.
Fit the terminal bar connecting kit (see ref. 14
fig. 14) onto the end of the arm (see ref. 15
fig. 14), (box spanner 13).
ATTENTION
Ensure that the two kits are correctly fixed to
the ends of the arms.
Assemble the arms (see ref. 16 fig. 15) on the
respective levers (see ref. 17 fig. 15).
ATTENTION
The arm must be fitted CLOSED . Do not re-
move the safety strap provided; the arm is al-
ways under tension, if it were opened without
control it could cause serious harm to per-
sons, animals and things.
fig.15
fig.13
fig.14
fig.12
11
12
13
14
15
16
17