22
o
f
25
MAIN ROOF PANEL ASSEMBLY
Note:
Install Main Roof Panels from Left to Right. The Right Panel must overlap the Left Panel. Each
Bolt (EE) must be attached to Spacer (KK) on top of lintels. Hand Tighten only until all panels
have been installed then tighten all bolts.
Step 13A:
Attach Main Roof Left Panel (T1) to Long Lintel (D2) using Bolt (EE) and Spacer (KK). See Figure
13-1.
Step 13B:
Attach Main Roof Left Panel (T2) to Long Lintel (D2) using Bolt (EE) and Spacer (KK).
Note:
Panel (T2) must overlap Panel (T1). Repeat installation and overlapping for Main Roof
Panels (T6, T8, T7, T4 and T5) using Bolt (EE) and Spacer (KK). See Figure 13-2.
Step 13C:
Attach Main Roof Left Panel (T1) to Short Lintel (C2) using Bolt (EE) and Spacer (KK). Hand
tighten Only. Attach Main Roof Left Panel (T2) to Short Lintel (C2) using Bolt (EE) and Spacer
(KK).
Note:
Panel (T2) must overlap Panel (T1). Repeat installation and overlapping for Main Roof
Panels (T3, T4 and T5) using Bolt (EE) and Spacer (KK). See Figure 13-3.
Step 13D:
Repeat for opposite sides.
Tighten all Bolts.
See Figure 13-4.
Figure 13-1
Figure 13-2
Figure 13-3
Short Side
Long Side
Figure 13-4
