5
o
f
14
Assembly Instructions
Jordan 10’ x 10’ Arched Pergola
Note: For video instructions please visit:
https://shadenshelters.com/10-x-10-jordan-pergola
Important:
⚫
Read all the instructions before assembly. Failure to do so may result in faulty assembly and
potential injury.
⚫
Before assembling the product, remove all protective materials, hardware kit(s), and identify all
parts packed in the carton are present. (Note: If any part is missing or damaged, do not attempt to
assemble). Contact Shade N’ Shelters Customer Support. See page 14.
⚫
Assemble on a stable level surface to avoid damage to gazebo and possible injury.
⚫
Two people are required to assemble this product.
⚫
Pergola dimensions are measured from roof corner to roof corner.
WARNING: DO NOT TIGHTEN BOLTS UNTIL NOTED AFTER EACH STEP!
Step 1A:
Insert the Corner Posts (A) into the Base Covers (J), then attach the Base Plates (K) to the Corner
Posts (A) using Bolts (N) and Washers (R).
Tighten Bolts.
See Figure 1-1.
Step 1B:
Place the Corner Post Cover (H) onto the top of the Corner Posts (A). See Figure 1-2. Do not
attached with Bolts at this point.
Figure 1-1
Figure 1-2
A
A
K
R
N
N
R
H
H
J
