background image

PAGE 11

PAGE 10

TROUBLESHOOTING

SERVICE AND REPAIRS

All quality tools will eventually require servicing or replacement of parts due to wear 
from normal use. These operations should ONLY be performed by a licensed profes-
sional technician. Never try to repair the tool by yourself.

Disconnect tool from air supply before performing any 
service procedure.

 

 WARNING   

SYMPTOM

PROBLEM

SOLUTION

Air leak near top 
of tool or in trigger 
area.

Loose screws.
Worn or damaged o-rings 
or seals.

Tighten screws.
Install overhaul kit.

Tool does nothing 
or operates 
sluggishly.

Inadequate air supply.
Inadequate lubrication.
Worn or damaged O-rings 
or seals.

Verify screws.

Install overhaul kit.

Air leak near 
bottom of tool.

Loose screws.
Worn or damaged O-rings or 
bumper.

Tighten screws.
Install overhaul kit.

Tool jams 
frequently.

Incorrect fasteners.
Damaged fasteners.
Magazine or nose screw 
loose.
Magazine is dirty.
Driver is worn or damaged.

Verify fasteners of correct size.
Replace fasteners.
Tighten screws.

Clean screws.
Install Driver maintenance kit.

Other

Contact SGS Engineering.

WWW.SGS-ENGINEERING.COM

Содержание SAT403








Отзывы: