c. Technological parameter setting (Celsius degree)
Operating temperature: press button “temperature setting” in the initial state, temperature indicator starts
blinking. Press “+” or “-“ to set the operating temperature. When temperature setting is completed, press “temperature
setting” again to return to the initial state.
Heating time: press button “time setting” in the initial state, time indicator will start blinking. Press “+” or “-“ to set
heating time. When heating time setting is completed, press “time setting” again to return to the initial state.
d. Reference values (
these values are for reference only and can vary with different products
)
Operating temperature can be set to 170
℃
, max temperature can be set to 180
℃
for 10s.
02
4. As shown in Figures 5 and 6, pull the “cap stretcher handle” following the direction of the arrow to lift the
cap stretcher. Fit the cap to be processed onto the mould, release the “cap stretcher handle”, the cap will be
flattened, as shown in Figure 7.
Figure 5
Figure 6
Cap stretcher handle
5. When the operating temperature is reached, push the “pressure handle” down until the beeper keeps
beeping, as shown in Figure 8 and 9. Then, lift the “pressure handle” and remove the cap from the mould.
Pressure handle
Figure 7
Figure 8
Figure 9
Содержание CapHeat
Страница 1: ...Golf CapHeat Press Machine User Manual...