page
6
Positioning and Focusing
Positioning
To position the projector, the channels must be set as follows:
Channel 1
dimmer
100% open
Channel 2
colour
white
Channel 3
gobos
no figure
Channel 4
shutter/strobe
open
Channel 5/6
pan/tilt
centre position
Channel 7
gobo rotation
off
Channel 8
palette
none
Channel 9
prism
off
Position the projector rotating it on its support bracket, then lock it in the desired position with the
knobs.
Focus adjustment
To adjust the lens, the channels must be set as follows:
Channel 1
dimmer
100% open
Channel 2
colour
white
Channel 3
gobos
position on a figure
Channel 4
shutter/strobe
open
Channel 5/6
pan/tilt
in position on the point where focus is desired
Channel 7
gobo rotation
off
Channel 8
palette
none
Channel 9
prism
off
Focusing the Victorys is very easy, fast and with absolute precision through the screw knob located on
the front of the projector (Focus). Focusing is accurate on all the gobos as they are all arranged on the
same wheel.
focus
Victory
focus
focus
Victory
focus
V
ictor
y
