23
Interaction with R-2 Rail Light (software)
To establish connection between the wireless Lumen Radio transmitter and the R-2 Rail Light fixture(s), connect both to power
and click the ‘Link’ button on the wireless transmitter
Wireless status
The diode on the base of the fixture (see parts identification on page 10 for more details) displays the current wireless status.
See detailed explanation below.
When you have set your DMX address and you click ‘
Send
’, all active R-2 Rail Light fixtures will start flashing. To assign the
chosen DMX address to a specific fixture, click the control button on the base of the fixture (see parts identification on page 10
for more details). The fixture will stop flashing and is now assigned to the chosen DMX address. To assign more fixtures to
the same DMX address, simply click the control button on the desired number of fixtures.
OFF = Not linked to transmitter
FLASHING (FAST) = Active radio link, but no DMX data
FLASHING (SLOW) = Linked to transmitter, but no active radio link
ON = Active radio link and DMX data
Manual_R-2_170x113,3.book Page 23 Thursday, June 4, 2015 9:39 AM
