SGK AL-12, Инструкция по эксплуатации

Страница: 8 / 20

7. SGK AL-12 PRE USE INSPECTION PROCEDURES
Warning
Never assume that the SGK AL-12 AirLight Lifter is ready to use straight
out of the box, the tool should be carefully inspected prior to operating to
ensure that the tool and the operating parts as depicted in the illustration
on page 5 are in a serviceable condition.
It is the responsibility of the SGK AL-12 AirLight Lifter operator to inspect
and check the tool prior to use. If the tool is found to be defective in any
way remove the tool from service and contact SGK Lifters Pty Ltd.
8. SGK AL-12 ELECTRICAL WARNING
Danger Warning
Risk of electric shock.
Failure to observe the following warnings may result in
personal injury, death or equipment damage.
It should be noted that the SGK AL-12 AirLight Lifter is not an electrically
insulated device and should be treated with caution when operating.
Before attempting to service the luminaire fixture the circuit must be
isolated and locked out.
The constant current regulator must also be electrically isolated so that
the circuit cannot be energised by remote means.
The circuit must have no power and be proved de-energised prior to
commencement of work.
Allow sufficient time for the luminaire fixture to cool as the high interior
temperatures may cause severe burns.
SGK AL-12 AirLight Lifter R-01 Page 6