SG Models GILMORE RED LION RACER 33cc, Инструкция по сборке

Страница: 25 / 43

25
4 .
1 .
2 .
2 .
1 .
2 .
3 .
INSTALLING THE HORIZONTAL
STABILIZER
Using a ruler and a pen, locate the cen-
terline of the horizontal stabilizer, at the
trailing edge, and place a mark. Use a tri-
angle and extend this mark, from back to
front, across the top of the stabilizer. Also
extend this mark down the back of the
trailing edge of the stabilizer.
Using a modeling knife, carefully remove
the covering at mounting slot of horizon-
tal stabilizer ( both side of fuselage).
Cut.
INSTALL ELEVATOR CONTROL HORN
Fiberglass control horn
Epoxy.
Epoxy.