sfty Sense, Руководство по эксплуатации продукта

Страница: 8 / 12

V1.3, January 2018 8
Key functionality
Burglar alarm
Your sfty Sense is installed with motion detection
which works as a burglar alarm that you can turn ON
and OFF through the app. Activation is never instant -
but the app will tell you how long activation will take.
Once the burglar alarm is fully active, any motion
matching the sensitivity settings will trigger a 60
second alarm countdown (recognized by gentle
double-beeps) and following that (if not turned OFF) -
a local alarm sirene. Home users with the appropriate
rights will also receive an alarm on their phone.
To turn ON the burglar alarm using the app
Tap the burglar alarm switch to ON on the app home
screen. The app will tell you how long until the burglar
alarm is active.
To turn OFF the burglar alarm using the app
Tap the burglar alarm switch to OFF on the app home
screen. Your devices will stop counting down or
cancel an ongoing alarm between 1 and 15 seconds
(depending on your WiFi internet response time)
Remote control
In case your phone is out of battery or unavailable, or
you have someone in the house that does not have a
supported mobile device, the remote control is your
backup. Turn your burglar alarm ON orOFF with these
steps:
Make sure that the test/mute button lights up blue for
each press!
1) Point your remote directly at the sfty
Sense
2) Hold ON or OFF in for a few seconds
3) Enter your 4-digit PIN code with firm, slow
presses
4) Press ON or OFF firmly again
Example: ON 1234 ON -- OFF 1234 OFF
Use of the burglar alarm is restricted if the device has
entered its low-battery-state near the end of its
battery-life.