Conformity Information
EU
This device complies with the essential requirements of the following directives and
harmonised standards:
✓
2014/35/UE (Low Voltage)
✓
2014/30/UE (EMC)
✓
EN61000-6-2:2005 (EMC Immunity)
✓
EN60664-1:2007 (Electrical safety)
✓
EN61000-6-4:2007 (Emission for industrial environments)
✓
2011/65/UE (RoHS)
The declaration of conformity is available on the internet at the following address: https://
www.sferalabs.cc/strato-pi/
USA
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense. The end user of this
product should be aware that any changes or modifications made to this equipment
without the approval of the manufacturer could result in the product not meeting the Class
A limits, in which case the FCC could void the user's authority to operate the equipment.
Shielded cables must be used with this equipment to maintain compliance with FCC
regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
CANADA
This Class A digital apparatus complies with Canadian ICES-003 (A).
Cet appareil numérique de la classe A est conforme à la norme NMB-003 (A) du Canada.
29
Strato Pi CAN User Guide