SFA Saniflo Sanicubic 2, Руководство по быстрому устранению неисправностей

Страница: 5 / 12

Possible Reasons Remedies
The cutter assembly jammed /blocked
by a foreign object
Remove the blockage from cutter assembly
(also check impellers for residual foreign
matter)
Pump cover misaligned, impeller
loose, or failed capacitor
Check correct mounting of pump cover and
impeller.
Test and replace capacitor.
Motor windings failure Electrician to test windings and replace
motor if required
Symptom The motor hums, but does not run/activate
Sanicubic 2 Troubleshooting Guide
Given that Sanicubic 2 has two motors, we need to clarify that one or both motors are still working. This can
be done by pressing the motor override buttons for each motor on the main control panel.