SF SFTHRP121WFC, Руководство пользователя и инструкции по установке

Страница: 39 / 45

35
Technician Setup
To enter Technician Setup, press and hold the SETUP button for 10 seconds.
After all the icons appear, press MODE. The version number of the thermostat
will appear in the scrolling text. Press MODE to advance to the next step.
Use the WARMER or COOLER buttons to adjust the value of your selection.
To leave Technician Setup, press SETUP.
Technician Setup is for diagnostic and testing purposes and is intended for
use by a qualified technician.
Technician Setup contains the following options:
• View the version number of the thermostat.
• View the jumper setting of J1 (Gas/Electric or Heat Pump), J2 (Reversing
Valve: RV=O or RV=B), and J3 (Fan: Gas or Electric) jumpers located on the
back of the thermostat. (Remove thermostat from backplate for access)
• View the state of the Dry Contact and Fault terminals.
• Turn on equipment outputs for testing.
• Calibrate thermostat and remote sensors.
Hold for 10 seconds All icons appear Press MODE to advance
through the setup steps
Press WARMER or COOLER
to adjust the selection
MODE
Set
Clock
Set
Clock
SETUP
Set
Clock
MODE
Hold for 10 seconds All icons appear Press MODE to advance
through the setup steps
Press WARMER or COOLER
to adjust the selection
WARMER
COOLER
MODE
SETUP
HI
Lo
Program ONOFF
Outdoor
Fan On
C
OO
L
A
UX
H
EAT
Day Night
Morning
Evening
Setup Step
2nd3rd
Stage
Am
Pm
18:88
188
188
88 188
Morning Day Night
Evening