FW5870 User's Manual
M4051-01
１３
１３
１３
１３
Seyeon Tech Co., Ltd
G
Mod0, Audio-In 1
3.5mm Audio Jack for Audio-In 1 of Module 0
Mod0, Audio-In 2
3.5mm Audio Jack for Audio-In 2 of Module 1
Mod0, Audio-In 3
3.5mm Audio Jack for Audio-In 3 of Module 1
Mod0, Audio-In 4
3.5mm Audio Jack for Audio-In 4 of Module 1
H
Mod0/DI
Sensor/Contact Input Port for Module 0
I
Mod0/DO
Beacon/Alarm Output Port for Module 0
J
AUX
Auxiliary port for Modem or other devices (PTZ, UART-Out, Audio, UART-In)
K
LAN
RJ-45 Network Connector
L
COM
Control port for setup or other devices ( PTZ, UART-Out, Audio, UART-In)
M
Audio Out
Speaker jack to receive audio in 2-way audio communication.
N
Video MUX Out
Video output port for viewing 8-channel video inputs on the screen.
O
Power Connector
DC 12V, 5A
Table 5 : FW5870 Rear panel
2.2.1. COM Port Description
The picture below shows how to wire the COM port connector pins when configuring the FW5870 with
console. Each signal should be wired to the correct pin as shown in the picture. It is a common practice to
use only RXD, TXD, and GND signals for RS-232 functionality. If FW5870 needs to be connected a
computer through RS-232, then RXD and TXD pin may need to be cross-wired.
Picture 4 : COM Port Description
