14
4. Self Test
The self-test lets you know if your printer is operating properly. It checks the
control circuits, printer mechanisms, print quality, ROM version and DIP switch
settings.
This test is independent of any other equipment or software.
Running the self test
1
Make sure the printer is turned off and the printer cover is closed properly.
2
While holding down the FEED button, turn on the printer using the switch on the
front of the printer to begin the self-test. The Self Test prints the printer settings
and then prints the following, Cuts the paper, and pauses. (Error LED On)
Self-test printing
Please press the PAPER FEED button.
3
Press the FEED button to continue printing.
The printer prints a pattern using the built-in character set.
4
The self test automatically ends and cuts the paper after printing the following.
*** Completed ***
※ The printer is ready to receive data as soon as it completes the self-test.
