SEWOO LK-P24 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 17

SEWOO LK-P24 Скачать руководство пользователя страница 13

18

19

NOTE

- Please refer to the Configuration manual for details.
- NFC is only compatible with Bluetooth.

9-3. NFC Connection

Optional

1. The printer can be connected to devices equipped with NFC communication
capabilities.
2. Use the NFC connection function supported by the device to connect to the printer.

NOTE

- This model supports Numeric Comparison function.
- Please refer to the configuration manual for details.

NOTE

- Please refer to the configuration manual for details.

9. PERIPHERAL CONNECTION

9-1. Bluetooth Connection

9-2. Wi-Fi Connection

Optional

Optional

1. The Printer can be connected to devices equipped with Bluetooth communication
capabilities (PDAs, PCs, etc.).
2. Use the Bluetooth connection function supported by your device to connect to
the printer.

1. The Printer can be connected to devices equipped with Wi-Fi communication
capabilities (PDAs, PCs, etc.).
2. Use the Wi-Fi connection function supported by the device to connect to the printer.

This product can communicate with other devices via Bluetooth,

Wi-Fi or a communication cable.

«
...
11
12
13
14
15
...
»

Содержание LK-P24


















Отзывы:

Нет отзывов