SEWOO LK-P SERIES, Руководство по управлению

Страница: 16 / 48

ESC/POS Command Manual
16
[Details] —The line spacing can be set independently in standard mode and in page mode.
—In standard mode, the vertical motions until (y) is used.
—In page mode, this command function as follows,
depending on the starting position of the printable area :
When the starting position is set to the upper left or lower right to the printable area
①
using ESC T, the vertical motion unit
(y)
is used.
When the starting position is set to the upper right or lower left of
②
the printable area using ESC T, the horizontal motion unit (x) is used.
—The maximum paper feed amount is 1016 mm {40”}. Even if a paper feed amount of more than
1016 mm{40”}is set, the printer feeds the paper only 1016 mm{40”}
[Default] Line space is equivalent to approximately 4.23 mm{1/6”}.
[Reference]
ESC 2
ESC ? n
[Name]
Cancel user-defined characters
[Format]
ASCII ESC ?
n
Hex 1B 3F
n
Decimal 27 63 n
[Range]
32 ≤
n
≤126
[Description]
Cancels user-defined characters.
[Details]
—This command cancels the pattern defined for the character code
specified by n. After the user-defined characters is canceled, the corresponding pattern for the
internal character is printed.
—This command deletes the pattern defined for the specified code in the font selected by ESC !.
—If a user-defined character has not been defined for the specified character code,
the printer ignores this command.
[Reference] ESC &, ESC %
ESC @
[Name]
Initialize printer
[Format]
ASCII ESC @
Hex 1B 40
Decimal 27 64
[Description]
Clears the data in the print buffer and resets the printer mode to the mode
that was in effect when the power was turned on.