background image

6

Operating Instructions – MOVITRANS® THM20C / THM20E Pick-Ups

2

Preliminary information

Safety Notes

2

Safety Notes 

2.1

Preliminary information

The following basic safety notes must be read carefully to prevent injury to persons and
damage to property. The operator must ensure that the basic safety notes are read and
observed. 

Make sure that persons responsible for the plant and its operation, as well as persons
who work independently on the units, have read through the documentation carefully
and understood it. Consult SEW-EURODRIVE if you have any questions or if you re-
quire further information.

The following safety notes are primarily concerned with the use of MOVITRANS

®

 units.

If you use other SEW components, also refer to the safety notes for the respective com-
ponents in the corresponding documentation.

Please also observe the supplementary safety notes in the individual sections of this
documentation.

2.2

General information

Removing covers without authorization, improper use as well as incorrect installation or
operation may result in severe injuries to persons or damage to property.

2.3

Target group

Any mechanical work may only be performed by adequately qualified personnel. Quali-
fied personnel in this context are persons who are familiar with the setup, mechanical
installation, troubleshooting and maintenance for the units. Further, they are qualified as
follows:

• Training in mechanical engineering, e.g. as a mechanic or mechatronics technician

(final examinations must have been passed).

• Knowledge of this documentation

Any electronic work may only be performed by adequately qualified electricians. Quali-
fied electricians in this context are persons who are familiar with the electronic installa-
tion, startup, troubleshooting and maintenance for the units. Further, they are qualified
as follows:

• Training in electrical engineering, e.g. as an electrician or mechatronics technician

(final examinations must have been passed).

• Knowledge of this documentation

All work in further areas of transportation, storage, operation and waste disposal may be
carried out only by persons who are trained appropriately.

Содержание MOVITRANS THM20C

































































Отзывы: