SEW-Eurodrive MOVI-C UHX25A Series Скачать руководство пользователя страница 40

Страница: 40 / 72

Startup with EtherNet/IP™

Configuration of the fieldbus stations

Manual – MOVI‑C

CONTROLLER standard UHX25A

5.4

Configuration of the fieldbus stations

In the exemplary project, the following devices are the fieldbus stations:

•

The PLC serves as fieldbus master.

•

The MOVI‑C

CONTROLLER serves as fieldbus slave.

The devices are configured in the following tools:

•

MOVISUITE

•

IEC Editor (integrated in MOVISUITE

)

•

Studio 5000 Logix Designer, Version V27

INFORMATION

The figures in the sample project refer to the English version of the tool Studio 5000
Logix Designer.

The fieldbus stations are configured in several process steps:

•

Configuring the fieldbus option of the MOVI‑C® CONTROLLER

•

"Installing the device description file of the MOVI‑C

CONTROLLER" (→

40)

•

"Creating a project in Logix Designer" (→

41)

•

"Configuring the EtherNet/IP™ scanner" (→

42)

•

"Integrating and configuring the MOVI‑C

CONTROLLER in the fieldbus net-

work" (→

44)

•

"Setting up the project path" (→

48)

•

"Loading the Logix Designer project to the PLC" (→

49)

5.4.1

Installing the device description file of the MOVI‑C

CONTROLLER

INFORMATION

A modified device description file can cause malfunctions in the device.

not

change or expand entries in the device description file. SEW‑EURODRIVE

assumes no liability for malfunctions of the device caused by a modified device de-
scription file.

A prerequisite for the correct configuration of the MOVI‑C

CONTROLLER with field-

bus interface EtherNet/IP™ is the installation of the device description file (EDS file) in
the Studio 5000 Logix Designer. The file contains all relevant data for the engineering
and data exchange of the MOVI‑C

CONTROLLER.

The current version of the device description file for the MOVI‑C

CONTROLLER with

fieldbus interface EDS file is available on the website of SEW‑EURODRIVE
→

www.sew-eurodrive.com

. Search on the page [Online Support] > [Data & docu-

ments] > [Software] for "EDS files for EtherNet/IP™".

25800736/EN – 08/2018

Содержание MOVI-C UHX25A Series









































































Результаты поиска

Содержание MOVI-C UHX25A Series

Отзывы:

SEW-Eurodrive MOVI-C UHX25A Series, Руководство пользователя, Страница: 40 / 72

Результаты поиска

Содержание MOVI-C UHX25A Series

Отзывы: