SEW-Eurodrive MFD Series Скачать руководство пользователя страница 106

Страница: 106 / 140

Operation with the MOVITOOLS

MotionStudio engineering software

Serial communication (RS485) via interface adapters

Manual – EtherCAT

Interfaces, Field Distributors

106

3. Click the button [3].

This displays the settings for the communication type "Serial". The figure shows
the USB11A interface adapter selected as COM port as an example.

9007200201689739

4. It might be necessary to change the preset communication parameters on the tab

pages "Basic settings" and "Extended settings". For a detailed description of the
communication parameters, refer to chapter

Serial communication parameter

(RS485)" (→

106).

13.4.3

Serial communication parameter (RS485)

The following table describes the [Basic setting] for the serial (RS485) communication
channel:

Communication
parameters

Description

Note

COM port

Serial port connec-
ted to the interface
adapter

•

If there is no value entered here, the
SEW Communication Server uses the
first available port.

Baud rate

Transmission speed
with which the con-
nected PC commu-
nicates with the
device in the net-
work via the commu-
nication channel.

•

Possible values:

– 9.6 kbit/s

– 57.6 kbit/s

– AUTO (default setting)

•

Find the correct value for the connec-
ted device in the documentation.

•

If you set "AUTO", the devices are
scanned with both baud rates in suc-
cession.

•

Set the initial value for automatic baud
rate detection under [Settings] > [Op-
tions] > [Communication].

25809148/EN – 01/2019

Содержание MFD Series













































































































































Результаты поиска

Содержание MFD Series

Отзывы:

SEW-Eurodrive MFD Series, Руководство пользователя, Страница: 106 / 140

Результаты поиска

Содержание MFD Series

Отзывы: