SEW-Eurodrive GBG10 A Series, Дополнение к инструкции по эксплуатации

Страница: 15 / 20

5
Operation
Local mode depending on switch position
Addendum to the Operating Instructions – GBG10..A..
15
5.3 Local mode depending on switch position
The following table provides an overview of drive unit operation depending on the
switch position of the CBG10..A keypad:
Button position Drive unit
operation
Brake/DynaStop
®
control
"MODE" Rotary
switch
"SPEED" "BRAKE" "RESET"
AUTO X
Automatic mode
Control via bus, ...
by drive unit
LOCAL STOP X AUTO 0
Local mode
Stop, no enable
by drive unit
LOCAL CCW f1 AUTO 0
Local mode
CCW rotation with f1
by drive unit
LOCAL CCW f2 AUTO 0
Local mode
CCW rotation with f2
by drive unit
LOCAL CW f1 AUTO 0
Local mode
CW rotation with f1
by drive unit
LOCAL CW f2 AUTO 0
Local mode
CW rotation with f2
by drive unit
LOCAL STOP X MANUAL 0
Local mode
Stop, no enable
Manual
X Drive fault
1)
Brake applied.
DynaStop
®
is active.
LOCAL STOP X 0 → 1
2)
Fault reset
after drive fault
by drive unit
1) Fault on the drive unit.
2) Fault reset by pressing the "RESET" button.
X = any switch position
23569654/EN – 07/2017