Step 1.
Slide TOP FRAMES (A, B, C) onto LOWER FRAMES (E, D).
Attach with SCREWS (Q) to make LEFT FRAME (C, E),
CENTER FRAME (B, D), and RIGHT FRAME (A, D).
Clip FEET (P) onto bottom of frames.
Step 2.
Screw CONNECTOR SCREWS (Q) into ends of two
SHORT POLES (F) with long ends outside. Insert the long ends
through the bottom screw holes on the CENTER FRAME (B, D).
Attach with HEX SCREWS (T) to RIGHT FRAME (A, D).
Connect the right and center frames from with
SHORT POLES (F) using HEX SCREWS (T) and HEX KEY (V).
Step 3.
Screw BASE POLES (G) to the CONNECTOR SCREWS (Q).
Attach to LEFT FRAME (C, E) with HEX SCREWS (T).
Fit HEX SCREW (T) through screw hole in top of left frame.
Fit curved side of WASHER (O) over screw threads all the way
to the frame. Screw TOP CROSSBAR (H) onto threads.
Attach TOP CROSSBAR (H) to middle frame with WASHER (O)
and HEX SCREW (T).
Tighten all hex screws until snug.
Assembly Instructions
2
