Seville Classics UltraHD UltraGuard 20147, Руководство по сборке

Страница: 8 / 15

TIP:
Step 2.
Step 3.
Step 4.
UltraHD® 6-Drawer Rolling Cabinet (Model No. 20204, 20147, 20159)
Install the Left Panel (#4)
Remove 2 pcs Slide r s to create the space needed to
use the screwdriver (#21). Then, attach the Left
Panel (#4) to the Front Frame (#6) and the Solid
Hardwood Top (#1). Make sure the “Top” of the
Left Panel (#4) is on the Solid Hardwood Top (#1)
and the screw holes are lined up to the Front Frame
(#6). Use Screwdriver (#21) and 6
pcs Screw A (#14)
to tighten the Left Panel (#4) to the Front Frame
(#6), and then to Solid Hardwood Top (#1).
Re-i nstall the removed 2 pcs S lide r s to the
Left Panel (#4).
Remove 2pcs Slides to create the
space needed to use the Screwdriver
(#21).
A magnetic screwdriver is included for your
convenience.
If using a powered driver, keep
torque setting on LOW .
Open the package, and put the parts aside.
Leave the Solid Hardwood Top (#1) on
cardboard during assembly to reduce the
chance of scratching the top.
Install Front Frame (#6)
Locate the Front Frame (#6) and attach to the
"Front" of the Solid Hardwood Top (#1), using 3pcs.
Screw A (#14) and Screwdriver (#21) to tighten.
Make sure that the top and sides of the Front Frame
are flush with the Solid Hardwood Top (#1) –
The screw holes have some tolerance, and aligning
now may save time by preventing adjustments later.
Back
7
Front
Front
Back
Front
Back
Front
Back
*NOTE: We recommend using TWO people to assemble the cabinet .
Note:
Step 1.