4. Install the “S” hook from one end of the chain into the end cap of the LED shop light, then
crimp the hooks end with pliers. Repeat same step for the opposite side.
7. Plug the power supply cord into the electrical outlet.
STYLE 2 INSTALLATION INSTRUCTIONS:
1. Mounting surface must be capable of supporting the fixture. If the surface is made of
plaster board, we recommend that you use minimum #8 screw eye hooks with plastic
anchors (included) or expansion bolts (not included). If installed onto a plaster board
2.
Install the 4 plastic anchors 46 1/2” apart and 3.189” apart, then screw the eye hook
into each anchor. Spacing between ceiling and cap nut should be at least 1/3”.
46 1/2"apart
3. Lift fixture up to screws and slide to one side to secure into place.
Screw size:ST4X30
